This is a 2X 11W AMPLIFIER BOARD CLASS-AB DIY of brand Daichi.

SALIN is a leading Australian appliance spare parts distributer . We take pride in our ability to bring hard to find appliance spare parts into the Australian market. We are proudly Australian owned and operated. Our warehouse and sales office is conveniently located in Auburn, NSW. Our range of spare parts are manufactured with premium components and quality material. Most of our range is directly sourced from manufacturers and geniune.  

TECHNICAL SHEET
Title 2X 11W AMPLIFIER BOARD CLASS-AB DIY
Notes 22W BRIDGED (4Ω) - 11W BRIDGED (8Ω) - 5.5W STEREO (4Ω) This is a pre-built dual audio power amplifier module and can operate from 9Vdc to 25Vdc (12V-18V Nom) making the EP22 suitable for use in many different replacement or project applications. At 13.2V the IC draws about 2A full volume. Very compact at only 32 x 36 x 20mm. The IC tag is earthed so it mounts direct to the chassis or heatsink (required but not supplied). Heat dissipation is around 25W. The IC is a genuine Toshiba Chip boasting impressive performance and phenomenal device protection! (Over voltage, Thermal, Short circuit, etc.) This incredible little module operates in high power BTL mode for a mono output of 22Wrms into 4ohm (11W into 8ohm), or can be quickly modified to operate in stereo mode giving 5.5W x2 into 4ohm (requires the addition of 2x 1000µf isolation capacitors). Changing the gain resistors will enable any sensitivity on the input, from mic to CD (pre-set to line level input). You will find the EP22 easy to set up, efficient and stable. Supplied wired in BTL mode, includes instructions. May require additional components depending on application.TA7280P9V - 25Vdc max12V-18Vdc Nom.Stereo 5.8Wrms(Requires Isolation Caps)BTL Mono 22WrmsRequires HeatsinkLine Level I/PChange gain32x36x20mm https://www.wes.com.au/powersearch.aspx?&srctext=EP22
ManufacturerDaichi
SKU NoWES_EP22_1

 

SALIN is not responsible for any possible damage caused by misselection and incorrect installation of the spare parts.

All electrical items must be fitted by a qualified electrician.

Errors and Omissions Excepted:

All information contained herein this website is assumed to be accurate, however, no responsibility is assumed by SALIN  for its use, nor for any infringements of patents or other rights of third parties which may result from its use.

Legal Disclaimer:

All trademarks, logos and principal representations remain the property of their respective owners. The use of brands, brand names and trademarks doesn't imply SALIN is representing those brands, companies, trademarks or names. SALIN holds no rights to products and/or services available or provided by the said companies, brands, brand names and trademarks.

MPN EP22
SKU WES_EP22_1
Brand Daichi