Fujitsu Air Conditioner Indoor Unit Pipe Thermistor

This is a replacement pipe thermistor for Fujitsu air conditioner indoor units. It is a temperature sensor that clips onto the refrigerant pipe at the indoor coil. The controller uses its reading to decide when to defrost in heating, when to protect the coil from freezing in cooling, and when to let the indoor fan run so it does not blow cold air at start up. A thermistor that has drifted or gone open circuit gives the controller wrong information and causes faults that look like refrigerant problems.

Part Numbers

9900892005

OEM Genuine

This is an OEM genuine part. It is made by the original equipment manufacturer, the same company in the same factory that made the part fitted to your appliance when it was built, and it carries their part number. It is supplied to us without the appliance brand retail packaging, and that is the only reason it costs less than a boxed part bought from the brand. The part itself is the same part.

Suitable Brands

Fujitsu

Suitable Models

ARTG45LHTDP, ARTG36LHTDP, ARTG45LDTA, ARTG30LHTDP, ARTG60LDTA, ARTG54LHTDP, ARTG54LDTA, ARTG24LHTDP

When To Replace

Replace the thermistor when the unit reports a sensor fault code, when the indoor fan will not start in heating or blows cold, when the indoor coil ices up in cooling although the charge and airflow are correct, when the system defrosts far too often or never at all in heating, or when the sensor reads open circuit or well away from the expected resistance for the measured temperature.

Fitting

This part must be fitted by a licensed refrigeration mechanic or a qualified electrician. Isolate the system at the circuit breaker before starting. Open the indoor unit, note exactly which pipe the sensor is clipped to and how the lead is routed and secured, then unplug it at the control board and release the clip. Fit the new sensor to the same pipe in the same position, make sure it is in firm contact with the pipe and insulated from the surrounding air, route the lead the same way and plug it back into the same connector.

Notes

Sensor position is critical. A thermistor clipped to the wrong pipe or not making good contact will read the air temperature rather than the coil temperature, and the system will misbehave in exactly the same way as it did with the failed sensor.

TECHNICAL SHEET
Part No 9900892005
Product 9900892005 FUJITSU AIRCON INDOOR PIPE THERMISTOR-
Category Air Conditioning
Subcategory Air Conditioners
Class Air conditioners
Replacement Item Sensor/Thermistor/Thermostat
Suitable Brand Fujitsu
Suitable Models ✔ Fujitsu ARTG45LHTDP
✔ Fujitsu ARTG36LHTDP
✔ Fujitsu ARTG45LDTA
✔ Fujitsu ARTG30LHTDP
✔ Fujitsu ARTG60LDTA
✔ Fujitsu ARTG54LHTDP
✔ Fujitsu ARTG54LDTA
✔ Fujitsu ARTG24LHTDP
SKU Number SLN_0002710

*This item return is not accepted unless the part is faulty. Please choose accordingly or ask before purchase.

 

SALIN is not responsible for any possible damage caused by misselection and incorrect installation of the spare parts.

Errors and Omissions Excepted:

All information contained herein this website is assumed to be accurate, however, no responsibility is assumed by SALIN for its use, nor for any infringements of patents or other rights of third parties which may result from its use.

Legal Disclaimer:

All trademarks, logos and principal representations remain the property of their respective owners. The use of brands, brand names and trademarks doesn't imply SALIN is representing those brands, companies, trademarks or names. SALIN holds no rights to products and/or services available or provided by the said companies, brands, brand names and trademarks.

AIRLINK
SKU SLN_0002710
Model # 9900892005
Brand Fujitsu
Shipping Weight 1.0000kg