Omega / Blanco / Everdure / Belling Oven Fan Forced Element 2000 W

Replacement fan forced (circular) oven element, 2000 W for Omega, Blanco, Everdure and Belling built-in ovens and upright cookers. This is the ring element that sits behind the rear baffle plate, around the fan, and does the heating in fan-forced and fan-bake modes.

OEM Genuine. This part is made by the original equipment manufacturer - the same factory that produces it for the brand - and carries their part number. It is the same component, supplied without brand-name retail packaging, which is why it costs less than buying the boxed part through the brand.
Measure before you order.
Fan forced elements look alike but differ in ring diameter, bracket width and terminal spacing. Before ordering, check the ring diameter (approx. 210 mm) and the bracket and terminal arrangement against the photos. If your element differs, send us a photo of the old one with your model number and we will confirm before you buy.

Part Numbers

Part number V32010288. Cross-references and supersessions in this family include V32009186 and 32010288 / 32009186 written without the V prefix.

Specifications

Power: 2000 W
Voltage: 230-240 V a.c.
Type: fan forced / circular ring oven element
Ring diameter: approx. 210 mm
Terminals: spade tags on a flat mounting bracket
Position: behind the rear baffle plate, surrounding the fan

Fits These Models

OBO676XOBO674XOBO654GGOBO690GGOO664XOO654XOO654WOO654WAOBES601OBES602OBES6021OBES603OBES61OBES63OBES67OBES68OBEP6016BEP601

Brands: Omega, Blanco, Everdure and Belling. Appliance type: built-in wall oven and upright cooker.

Symptoms Of A Failed Element

  • Oven will not heat in fan forced mode, but grill or bake still works.
  • Food cooking unevenly, or taking far longer than it used to.
  • Oven never reaches the set temperature.
  • Visible break, blister, split or burn mark on the element ring.
  • Element glowing only in part of its length.
  • Circuit breaker or RCD tripping when the oven is switched to fan forced.

Fitting Notes

  1. Isolate the oven at the wall or switchboard before you start. This is mains-voltage work.
  2. Remove the racks and the rear baffle plate inside the cavity to expose the element.
  3. Photograph the wiring before disconnecting the terminals.
  4. Withdraw the element, transfer the wiring to the new one, and check the terminals are tight.
  5. Check the fan spins freely and the oven seal is intact while you have it apart.
  6. An RCD that trips on fan forced usually means a leaking element - replacing it fixes both faults.
  7. If you are not comfortable with mains wiring, have it fitted by a licensed technician.

Why Buy From Us

  • Australian stock, dispatched from our Sydney warehouse in Auburn NSW.
  • Same business day dispatch on orders placed before cut-off.
  • 12 month warranty.
  • Appliance spares specialists - talk to someone who knows the part.
AIRLINK AIRLINK0001501
SKU EBY2_265882756684
Model # V32010288
Brand Omega
Shipping Weight 1.0000kg