This is a replacement parts & accessories → ancillary products → liquid leak detectors. It is suitable for replacing VIPER Air Conditioners.

SALIN is a leading Australian appliance spare parts distributor for many types of applicances. We take pride in our ability to bring hard-to-find spare parts into the Australian market. We are proudly Australian-owned and operated. Our sales office is conveniently located in Sydney, NSW.

TECHNICAL SHEET
TitleLiquid Leak Detectors | Viper - Coil Coating | PN: RT640A
BrandViper
Replacement ItemParts & Accessories → Ancillary Products → Liquid Leak Detectors
Suitable ForAir Conditioners
MPNRT640A
SKU NumberKRB_0008175
Notes It is the toughest and longest lasting coating you will ever use. Bonds to all metal surfaces and withstands temperatures to 400F (205C). The aerosol injector provides a flat vertical spray pattern for reaching deep into the coil body. In field application, simply apply a single coat to the front and back of the coil. There will be no significant loss of heat transfer when used as directed. Viper Coil Coating is a solvent borne clear coating that meets all State and Federal VOC regulations.

  • Certified – Kosher and meets all State and Federal VOC regulations 
  • OEM – Used by OEM’s worldwide
  • Tested – 4300 hours at 60°c (10% Salt immersion)
  • Permanent Corrosion Protection – Epoxy Resin coating for extreme weather, salt and chemical environments. 
  • Fast Drying – Perfect for on site applications.

COMPETITIVE POINTS OF DIFFERENCE:

Viper Coil Coating is a clear, solvent-borne thin film epoxy resin that will bond to all metals and has continuous temperature rating of 205°C. The product will air-dry under normal conditions to completely set in less than 30 minutes. One single application is all that is necessary to protect coils, fins and other metals from salt water, acids, caustics, oxidations and corrosive environments.

APPLICTIONS:

A single coat to the front and back of the coil is all that is necessary for total corrosion protection. Start at the top corner of the coil and work horizontally.

DIRECTIONS:

  1. Turn off or disconnect all power from the system.
  2. Clean coil with Viper Brite to remove all surface oxidation, rinse and allow surface to dry.
  3. Always wear protective gloves, goggles, and clothing. Use in well ventilated areas.
  4. Hold the can a few inches away, apply a single coat to the front and back of the coil and all metal parts.
  5. Wait 30-60 minutes for product to dry. A full cure may take longer depending on weather conditions.
  6. Place system back into operation, all done!

FRIDGEY FACTS:

  • Heat transfer loss is less than 0.15%. Apply as a single coat, 0.5mm to 1.5mm thickness as directed.
     
  • Viper Coil Coating has a high product-to-propellant ratio compared to its many competitors. The product ratio is 92% product and 8% propellant. This instantly provides greater surface coverage. This means that Viper Coil Coating will bond to base metals that are not entirely free of corrosion or oxidation with a fast drying time, therefore no softening or blistering of the coating will occur during application.
     
  • Used worldwide by OEM’s.

 

SALIN is not responsible for any possible damage caused by misselection and incorrect installation of the spare parts.

All electrical items must be fitted by a qualified electrician.

Errors and Omissions Excepted:

All information contained herein this website is assumed to be accurate, however, no responsibility is assumed by SALIN  for its use, nor for any infringements of patents or other rights of third parties which may result from its use.

Legal Disclaimer:

All trademarks, logos and principal representations remain the property of their respective owners. The use of brands, brand names and trademarks doesn't imply SALIN is representing those brands, companies, trademarks or names. SALIN holds no rights to products and/or services available or provided by the said companies, brands, brand names and trademarks.

AIRLINK
SKU KRB_0008175
Brand Viper
Shipping Weight 1.0000kg